- Home
- ยป
- Our Product Range
- »
- Pyranometer Sensor
Pyranometer Sensor
Direct Solar Radiation Pyranometer
Minimum Order Quantity: 1 Piece
Class | 1 ,2 |
Measuring Range | 0 -2000 W/m2 |
Model Name/Number | LPPYRA |
Response Time | 15 |
Usage/Application | outdoor |
Weight | 300 |
power | 24 vdc |
Delta Ohm manufactures First Class lp pyra 02 and lp pyra 12 and Second Class lp pyra 03 pyranometers which fully comply with ISO 9060 standards, and meet the requirements defined by the World Meteorological Organization (WMO). These are strong and reliable ground-based instruments, especially designed to be used under all weather conditions. They are suitable for installation on the field.
SOLAR IRRADIANCE SENSOR
Minimum Order Quantity: 1 Set
Color | White |
Model Name/Number | SOZ 03 |
Output Current | 4 -20 mA |
Supply Voltage | 24 vdc |
Weight | 70 |
Range | 0 -2000 w/m2 |
Voltage | 24v |
Accuracy | 1 |
Mono Crystalline or polycrystalline Silicon Solar Cell (50 x 50 mm) laminated under special Solar Glass with excellent UV resistance and long-term stability
Plain integration into the top cover of the box
Advanced weatherproof junction box made of UV resistant material with cable gland and screw-less terminal for the connection of the measuring cable
High precision shunt resistor directly soldered to the terminals of the cell
Linear output signal in the range 0...1500 W/m
Individual calibration of each sensors in the natural sunlight close to AM 1,5 spectrum by means of a compatible calibrated reference cell
Accuracy of monthly sums compared to a W.M.O. class 1 Pyranometer (e.g. CMP 11) according to ISO 9060 better +-5 %
Very small drift of <0.3 / year (experience since 1989)
Integrated signal amplifier with output signal 0 - 5v,4- 20mA ,RS485
Additional Information:
- Item Code: SOZ03
Refusol Temperature And Irradiation Sensor
Usage/Application | Industrial |
Type | RS485 modbus |
Mounting Type | Outdoor |
Material | Plastic |
Accuracy | 1% |
Maximum Operating Supply Voltage | 24 vdc |
Output Type | 4 -20 mA .0 -10 V,RS485 modbus |
RS 485 Modbus, 4-20 mA . 0-10V
Silicon irradiance sensors (Si sensor) show a cost-effective, but rugged and reliable solution for the measurement of solar irradiance, especially for the monitoring of Photovoltaic (PV) systems. Based on the construction of the sensor element corresponding to a PV module they are ideal as reference for the monitoring of PV systems. Especially the spectral response comparable to PV modules as well as the similar inclination error (incident angle modifier) allow an exact analysis of PV energy yields using Si sensor data.
Pyranometer
Minimum Order Quantity: 10 Set
Product Brochure
Class | 2 |
Measuring Range | 0-2000 w/m2 |
Model Name/Number | LPPYRA03 |
Response Time | 15 |
Usage/Application | outdoor |
Weight | 200 |
supply | 24 v |
defined by the World Meteorological Organization (WMO).
These are strong and reliable ground-based instruments, especially designed to be used under all
weather conditions. They are suitable for installation on the field.
Recommended use atmospheric research, weather stations, climatology, energy saving research,
productive efficiency test of photovoltaic plants and more.
Additional Information:
- Item Code: LPPYRA03
Pyranometer Sensor
Minimum Order Quantity: 1 Set
Class | 2 |
Measuring Range | 0 -1800 W/M2 |
Model Name/Number | PYRA300 |
Response Time | 1MS |
Usage/Application | OUTDOOR |
Weight | 200 |
Features:
- Low maintenance cost
- High performance
- Durable
Specifications:
- Operating Temperature: -40° to 150° F (-40° to 65° C)
- Storage Temperature: -50° to 158°F (-45° to 70°C)
- Transducer: Silicon photodiode
- Spectral Response (10% points): 400 to 1100 nanometers
- Cosine Response
- Percent of Reading: ±3% (0° to ±70° incident angle);
- ±10% (±70° to ±85° incident angle)
- Percent of Full Scale: ±2% (0° to ±90°)
- Resolution and Units . . . . . . 1 W/m2
- Range:0 to 1800 W/m2
- Accuracy: ±5% of full scale (Reference: Eppley PSP at 1000 W/m2)
- Drift: up to ±2% per year
- Signal conditioned O/p: 4- 20 mA
- Excitation Voltage: 24 DC
Thermopile Pyranometer
Minimum Order Quantity: 1 Piece
Class | 1 |
Measuring Range | 0 -2000 |
Model Name/Number | cmp |
Response Time | 15 |
Usage/Application | OUTDOOR |
Weight | 400 |
Features:
- Easy to use
- High performance
- Fine finish
First Class Pyranometer
Minimum Order Quantity: 1 Piece
Features:
- Durability
- Corrosion resistance
- Energy efficient
Pyranometer Data Logger
Minimum Order Quantity: 1 Piece
Features:
- Sturdy construction
- Durable
- High performance
Solar Irradiance Sensor
Minimum Order Quantity: 1 Piece
Color | white |
Brand | IMT Solar |
• Operating temperature: -35°C to 80°C
• Electrical connection: 3 m shielded cable
• Load impedance for Si-01TC-batt: minimal 1 MΩ
• Load impedance for Si-01TC and -TC-T and Si-13TC and -TC-T: min. 10 kΩ • Load impedance for Si-420TC and -TC-T: minimal 20 Ω and maximal 400 Ω
• Case, protection mode: Powder-coated aluminium, IP 65
• Dimension, weight: 155 mm x 85 mm x 39 mm, approx. 350 to 470 g
• Customs number for all sensors: 85 41 40 90 • Protocol: M&T (type -MT), MODBUS RTU (type -MB), CANopen CiA 487
• Interface: RS485 up to 38.4 kBaud, CAN up to 250 kBaud
• Galvanic isolation: 1.000 V between power supply and bus
LI-COR LI-200R Pyranometer
Minimum Order Quantity: 1 Piece
The LI-200R Pyranometer is meant to be used outdoors under unobstructed natural daylight conditions. It measures global solar radiation—the combination of direct and diffuse solar radiation—in the 400 to 1100 nm range. Measurement units are in watts per square meter (W m-2).
Ideal for agricultural, meteorological, solar energy, and environmental research, the LI-200R is available with a variety of cable lengths and compatibility with most data loggers.
Second Class Pyranometer
Minimum Order Quantity: 1 Piece
Spectral range (50% points) | 300 to 2800 nm |
Sensitivity | 5 to 20 µV/W/m² |
Response time | 18 s |
Zero offset A | < 15 W/m² |
Zero offset B | < 5 W/m² |
Directional response (up to 80° with 1000 W/m² beam) | < 20 W/m² |
Temperature dependence of sensitivity (-10 ºC to +40 ºC) | < 5 % |
Operational temperature range | -40 °C to +80 °C |
Maximum solar irradiance | 2000 W/m² |
Field of view | 180 ° |
Secondary Standard Pyranometer
Minimum Order Quantity: 1 Piece
Spectral range (50% points) | 285 to 2800 nm |
Sensitivity | 7 to 14 µV/W/m² |
Response time | < 5 s |
Zero offset A | < 7 W/m² |
Zero offset B | < 2 W/m² |
Directional response (up to 80° with 1000 W/m² beam) | < 10 W/m² |
Temperature dependence of sensitivity (-10 ºC to +40 ºC) | < 1 % |
Operational temperature range | -40 °C to +80 °C |
Maximum solar irradiance | 4000 W/m² |
Field of view | 180 ° |
Silicon Pyranometer
Minimum Order Quantity: 1 Piece
Features:
- Digital display
- Easy functions
- Light weight
Specifications:
- Light Spectrum Waveband: 400 to 1100 nm
- Accuracy: Absolute error in natural daylight is ±5% maximum; ±3% typical
- Sensitivity: 0.2 kW m-2 mV-1
- Linearity: Maximum deviation of 1% up to 3000 W m-2
- Shunt Resistor: Adjustable, 40.2 to
- 90.2 ohm, factory set to the above sensitivity
- Stability: < ±2% change over a 1 year period
- Response Time: 10 μs
- Temperature Dependence: 0.15% per °C maximum
- Cosine Correction: Cosine corrected up to 80° angle of incidence
- Operating Temperature Range: -40° to 65°C; the overmolding that protects the completion circuit in the cable may crack if the temperature drops below -40°C
- Relative Humidity Range: 0 to 100%
- Detector: High stability silicon photovoltaic detector (blue enhanced)
- Sensor Housing: Weatherproof anodized aluminum case with acrylic diffuser and stainless steel hardware
- Diameter: 2.38 cm (0.94 in)
- Height: 2.54 cm (1.00 in)
- Weight: 28 g (1 oz)
Pyranometer
Minimum Order Quantity: 1 Piece
Pyranometer
Minimum Order Quantity: 1 Piece
Material | Class 1 |