- Home
- ยป
- Our Product Range
- »
- Temperature Transmitter
Temperature Transmitter
Temperature Transmitter
Minimum Order Quantity: 1 PIECE
Usage/Application | Industrial |
Voltage | 24 |
Accuracy | 0.5 |
Product Weight | 40 |
Protection Type | ip65 |
Rated Supply Voltage | 24 |
Response Time | 1ms |
Features:
- Corrosion resistance
- Highly demanded
- Long lasting
Other Details:
- Accurate ,Stable, Economical
- Compact size , BulK Head mounting
- Loop powered Transmitter
- On-site two point calibration
Specifications:
Measuring range | -50 ~ 50, 0 ~ 50, 0 ~ 100, 0 ~ 200, 0 ~ 400degc . |
Input | 3 wire rtd |
output | 4 ~ 20 ma two wire |
accuracy @ 25ºc | ± 0. 25% fs. |
Supply voltage | 12 to 30 vdc |
Housing | abs plastic. |
Weight | 60 g |
Dimensions | 44. 5 dia x 27 mm h |
RH Temperature Transmitter
Features:
- Easy to use
- User friendliness
- Easy installation
Other Details:
- Rh humidity and temperature
- Fast , stable and accurate
- Ip 65 enclosure
- Zero and span
- Loop powered 4- 20ma o/p
Specifications :
Accuracy @ 25ºc | 2 % rh , ± 0. 3º c |
Temp. Compensation | 0. 008 % rh /c( effect @ 0 % rh) |
Response | < 15 seconds |
Sensors | humidity : thin-film capacitor temperature : rtd pt100 |
Output | humidity : 4 -20 ma two wiretemperature : 4 -20 ma two wire( 0 -100º c) |
Supply voltage | 12 to 30 vdc |
Housing | abs plastic watertight enclosure ( ip 65) |
Weight | 150 g |
Dimensions | 82 x 80 x 55 mm |
Model : rht -1000 |
Head Mounted Temperature Transmitters
Minimum Order Quantity: 10 Piece
Temperature transmitter adopts 2-wire transmission mode. Temperature transmitter converts PT100 RTD sensor signal to 4-20mA output signal that is linear with the input electrical signal or the measured temperature. Head mounted temperature transmitter can be installed in the protection head of the RTD sensor to form an integrated structure.
Accuracy | ≤0.2%FS |
Power supply | DC 12-35V |
Input signal | RTD (PT100, PT1000 |
Output signal | 4-20mA |
Transmission mode | 2-wire |
Load resistance | 0~600Ω (DC 24V), rated load 250Ω |
Temperature influence | ≤0.05/1??? |
Mechanical vibration | f≤55Hz, amplitude???0.15mm |
Working environment | Temperature: -25~+80???, humidity: 5%~95%RH |
Signal Isolator
Minimum Order Quantity: 1 Piece
Features:
- Precise design
- Rugged construction
- Durable finish
Specifications:
- Programmable input: thermocouples type J, K, T, E, N, R, S, B, Pt100 RTD, and
- User programmable working range
- 2-wire loop powered 4-20 mA or 20-4 mA output 2 or 3-wire Pt100 input with linearized output
- Cold junction compensation for thermocouples
- TxConfig Windows configurator software
- Configuration with a PC via TxConfig interface
- Manual zero (offset) adjustment can be done by means of a wire jumper simulating
- Power supply: 12 to 35 Vdc
- Accuracy: Pt100 and 0 to 50 mV ±0.15% of full scale Thermocouples ± 0.25%
- Temperature effect: 0.003% of maximum SPAN/oC
- Working temperature: -40 to 85 oC (-40 to 185 oF)
- Sensor failure protection: programmable burnout upscale or downscale
- Dimensions: TxIsoBlock: 44 mm (Diam.) x 25 mm (H including bornes). Screw fix.
- TxIsoRail: 72 mm (H) x 78 mm (D) x 19 mm (W)
- Isolation: 1000 Vac between sensor input and 4-20 mA output loop
- Selectable mains filter: 60 Hz or 50 Hz